Chris in Indy, we need to meet sometime! Nice saves.

First design question... BB plywood or I have a lot of cherry stacked up in my garage. Do I display some craftsmanship (if all goes well...) by using solid wood, or go the quicker route and use ply?

Andy

Daniel said:

---

I'm having difficulties sharpening my card scraper. It's a recent purchase from Peachtree WW and I got a Crown burnisher as well. It actually came with a decent hook. I played with it a bit making some shavings and then wanted to move on to practice renewing the edge.

I've watched several different video techniques, mainly following this. I made the file guide, honed til shiney, and began burnishing. I'm scratching the heck out of the burnishing tool but cannot get a hook. I'm holding the tool at about 5-10 degree angle to the scrapers edge and using quite firm pressure.

Does anyone have any additional tips I could employ-- amount of pressure, hone longer, 'roll' or burnish the face edge harder? I'm curious if the scraper itself is too hard and possibly that is the main trouble.

Did it come easier to you? Thanks!

---

Not really a "workshop" forum here so I will start a thread in the woodworking forum.
I have been out of shop space for a long time. Ive added a CNC mill and metal lathes and a mill drill and it really pushed me to my limit.

I am building my own personal Tech Shop/Makerspace - I call it the Mikiespace.

Bloomington IL cant really sustain a membership based real tech shop and all the makerspaces we do have are all 3d printer and small electronic based offices. I want a Makerspace that has tools to do everything and room to teach and learn and room to change the focus of the events to the whims of the visitors. I hate panels and boards of people that only sit around and have meetings about this crap. I have been promoting DOERS here for awhile and have a group of guys I work with that also get things done - guitar build, motorcycle builds, cnc machines, etc. A couple months ago I had had enough talking about it and started researching. It was time to fix my space issues if I wanted to do more.

I changed all the power on my property to 400amp service/ installed a new meterbase and a couple 200 amp disconnects. Got a gas and line trenched and last Thursday I had an Indiana Amish crew come in and start my new pole barn. Here it is as of 5pm Friday 8/15. It will have a 5" thick concrete floor with radiant floor heat. There will be a 10X24 porch and two 14X14 overhead doors. Local crew will do the concrete. Eventually it will have a loft in part for a second story.

Anyway thought I would share the current adventure pic. Skidsteer in the back looks tiny LOL.

Your current belt speed is about 2700 sfpm. A 3" drive wheel will give you 1350, and a 4" will give you 1800.

sfpm = (diameter of drive wheel in inches) x (3.14) x (motor rpm) / (12 in/ft)

The idler wheel has no bearing on the belt speed, so you may not need to replace it if you can adjust it to take up the slack created by the smaller drive wheel.

I like what you did with the handle.

Arlin

I'm thinking along the lines that you are.

Put dados in the runners/supports that run the length of the bed. Drill them for lag bolts. Put perpendicular runners (for supporting your drawers) across, seated in the dadoes, and screw them into place. You'll still be able to take it apart.

Through nuts and bolts might be a better choice if it'll be taken down regularly.

Nice rescue on a rare saw Daryl! I always enjoy seeing the results of your work.

Richard

Completed a new 7 drawer chest to store my Chisels and all of my marking and small hand tools.

This is part of a multipart set of projects. # 3 of 5. Number 5 is a new workbench, but my OCD mind created a series of steps to get there.

Here are a pictures and some of the drawers. If you are interested ( really bored ) there is a 87 picture build album on my web site http://mysaw.com/shop/shop-projects/2014-chisel-chest/

The drawer fronts are cherry given to me by a friend. So I just took what I had with the least waste and used it. This was the subject of my finishing questions using WaterLox. Lets just say I am investigating new finishing products for my next project. ( General Finishes ).

I really, really like this after using it for about 3 weeks.

A little more info may be helpful. Specific species?Aprox size you are looking for? Also a WTB ad in Swap n Sell may yield some responses as well