+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Lumber Run (/showthread.php?tid=7378997)
Lumber Run - bandit571 - 08-05-2025
Has been made...
[attachment=55412]
I bought 4 planks @ 3/4" x 6" x 10'....a 4/4 x 6 x 6' Soft Maple plank, and a 8/4 x 6 x 6' Ash plank...needed to cut the 10 footers down to fit ibside the Chevy Equinox...so..I brought along a saw..
[attachment=55413]
With a freshly charged up 18v battery....Helper wasn't, as things bound up right near the end of a cut...PINCH!
There IS some live edge..
[attachment=55414]
The thicker Maple plank is in the back of the stack...
Grain for the 8/4 plank?
[attachment=55415]
I figure there MIGHT be enough there for a set of Table legs?
Letting this stash sit a few days, to get used to the house...
Price for this stack of lumber? $21 total....
Now just have to figure out what project to build all of this into....
Stay tuned...
RE: Lumber Run - bandit571 - 08-05-2025
Ok..the story behind that Circular saw...
[attachment=55416]
I picked this up as a Birthday present to me..for $5..had one of these inside..
[attachment=55417]
And one of these inside...
[attachment=55418]
Had 2 of those HUGE Batteries, and a charger..
And this saw..
[attachment=55419]
Plus a few DeWalt saw blades for the Recip. saw....
Them batteries are HEAVY...and only 18v....Was nothing about the saw blades needed for the Circular Saw...
RE: Lumber Run - stav - 08-05-2025
Your lumber runs are pretty amazing.
I don't know anything about the PC tool set, but for $5 you can't hardly go wrong. Congrats and happy late birthday.
RE: Lumber Run - iclark - 08-05-2025
The suckage is strong with this one.
