+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Mike and depth mike (/showthread.php?tid=7378296)
Mike and depth mike - tablesawtom - 04-08-2025
I have a Lufkin one inch mike. It is a ratchet fit or size. It has a veneer scale for reading in tenths of one thousands. Has all the fractional, decimal, conversions on the frame. It does not have carbide faces. I also have a Brown and Sharp, zero to 5inches depth mike. The base is 2 1/2 wide and the wood piece is included. The adjusting wrenches are under the depth mike in the wood flat. Asking $100 plus shipping.
[attachment=54293]
[attachment=54294]
[attachment=54295]
[attachment=54296]
Thanks for looking
Tom
RE: Mike and depth mike - Snipe Hunter - 06-11-2025
Mic... plus seventeen