+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Rehab work needed (/showthread.php?tid=7377960)
Rehab work needed - bandit571 - 02-19-2025
As this thing has set long enough in the shop...
[attachment=53752]
The sole will need sanded clean...
[attachment=53753]
Iron is not the "prettiest gal" on the block...
[attachment=53754]
Started to give a new edge....
Hardware LOOKS like it was made by Stanley..
[attachment=53755]
Will know more once they are polished up...nothing was rusted in place...
Then I place a Stanley No. 80 behind this scraper...
[attachment=53756]
And, some things just don't match up....Rusty & Krusty is slightly smaller, and lighter....Hmmmm?
Stay tuned...
RE: Rehab work needed - bandit571 - 02-20-2025
Over an hour in the Rehab Shop last night....
[attachment=53761]
Bolts and the keeper plate...
[attachment=53762]
Hmm...seems to be a Stanley SW Model?
Until an OEM No. 80 scraper blade shows up...
[attachment=53763]
This will have to do for the back...and..
[attachment=53764]
The beveled edge...have since added the burr..
Sole was give a ride on the beltsander...and then on the stones...
[attachment=53765]
Then a test drive on a stick of Ash...
[attachment=53766]
Seemed to work quite well...so it is now hanging up in the Tool Cabinet...along with the other No. 80 Scrapers...Once a paint brush loaded up with 3in1 oil had been brushed on, and then wiped down...
Thanks for looking in..( BTW...I spent $30 yesterday...nine 1x6 x 5' Ash planks, and four 1 x 6 x 6' Maple Planks came home with me...letting them get used to the shop , while I research a project for them..stay tuned..)