+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: RAS Miter Table (/showthread.php?tid=7377919)
RAS Miter Table - jteneyck - 02-13-2025
I posted about a new RAS Miter Table up in the Woodworking section. Link
![[Image: AP1GczPcBjR8hsdw5j1c0-gnv2Cxj9NCrv1IP1Ux...authuser=1]](https://lh3.googleusercontent.com/pw/AP1GczPcBjR8hsdw5j1c0-gnv2Cxj9NCrv1IP1UxD5hwzH1jDAUKpQewuS6Cb7Kyod-yAoQJ72aVnMyghuhhQKxjCR_IrJBUzq9s8r0pGf84U_hGTmop2WHPkb9N7yXUEY_ADvs4BzlzmuzQ2VjKSDOs_TRNPw=w1565-h880-s-no?authuser=1)
It's 32 x 17" and fits most any RAS. The unit is made from 3/4" plywood and comes with the hardware needed to install it on your RAS. I make it on my CNC, so tolerances are very tight. You will need to drill 4 holes in your table, one for the 1/4" pivot, one for the table lock, and two for the fine adjustment bracket. Installation takes less than 30 minutes. Removing and reinstalling the miter table is done in less than 1 minute.
The unit costs $95 (PayPal or check) and includes shipping within the CONUS. Shipment is about 1 week.
John
RE: RAS Miter Table - Tapper - 02-15-2025
FWIW, I've known John on this board for several years now. We've done some business in the past (I have one of his mortising machines, which works nicely as advertised) and his work is always impeccable.
I also have a Dewalt GA medium arm RAS that I'm nearing completion of a refurbishment on and ordered the miter table yesterday. Being able to leave the blade at dead 90 degrees and cut accurate miters can only be an advantage IMO.
I have no financial or other interest in this endeavor whatsoever.
Doug
RE: RAS Miter Table - jteneyck - 06-28-2025
Bringing this back for those who might not have seen it the first time or are on the fence. The RAS Rotary Miter Table will fit on any RAS.
![[Image: AP1GczOtmsMxrXFC6bwapgO7GVk5m6e0-RKZ6-Yq...authuser=1]](https://lh3.googleusercontent.com/pw/AP1GczOtmsMxrXFC6bwapgO7GVk5m6e0-RKZ6-Yq7E8xEnjYCoJaYjE9TKpyTp97shk_XEy0L1opPfRUOT1kcRzykrXbL4EyFCLLvx5ivhNui65caKsC_Mdq1I2Roz-MeRP-DRCg801R5TeJFBOYerKNWe3IxQ=w1460-h824-s-no?authuser=1)
![[Image: AP1GczPeLF_cIcwEDnPdluWJSwmL88NUjTE-dzrl...authuser=1]](https://lh3.googleusercontent.com/pw/AP1GczPeLF_cIcwEDnPdluWJSwmL88NUjTE-dzrlqwDj7bYQoI9S_SVxMUKt2ozEZLzaNtQ2wgMszobrZpAQW2XqjlMHeilkevrDIA1rJ_kpam5O-q-9vzpsX1jn577n3W8syU0RMLRzGWsQFFHE0A1yde0hXg=w1460-h821-s-no?authuser=1)
You can cut any miter and any compound miter angle WITHOUT having to move the arm off 90 degrees and to the full cut capacity of your saw. It is more accurate than any CMS and has greater cut capacity with most RAS's.
![[Image: AP1GczNAqwS5s2qjWz89mu8rmbIq0LMrRw0sqeNv...authuser=1]](https://lh3.googleusercontent.com/pw/AP1GczNAqwS5s2qjWz89mu8rmbIq0LMrRw0sqeNvyfkhi9EYD_t06srP5KchHHJdj-2jdvPb4Q4rXWScyK-F9NIFJT_b7nmO9irgC0IeX-rhQgbLIzBZSLJCDNcB9bKtWao_PsZyS-J_wvPt3cOtPXR1QOpKXQ=w1460-h821-s-no?authuser=1)
![[Image: AP1GczPQLkaAuV5Yp6Dk34og7DneqXt5GJnrDZ4B...authuser=1]](https://lh3.googleusercontent.com/pw/AP1GczPQLkaAuV5Yp6Dk34og7DneqXt5GJnrDZ4Bbjs7zqDVKfV3bQzgzh-jNvQJsXv_q86QieSj9yqH9qTwHQXgNGRSGkd9nlnhqjaeaEf_8sdCQ8dRN5RhW5bI7X9GHOngnOta2Hnb7ILGx4a4iATiH_DHGg=w1460-h821-s-no?authuser=1)
It's $95, including shipping in the CONUS.
John
RE: RAS Miter Table - Arlin Eastman - 07-03-2025
I will have to remember this for the future when I get the table on my DeWalt done. Well done!!
RE: RAS Miter Table - jteneyck - 07-06-2025
(07-03-2025, 07:42 PM)Arlin Eastman Wrote: I will have to remember this for the future when I get the table on my DeWalt done. Well done!!
Don't wait too long, Arlin. I'm getting older.
John
RE: RAS Miter Table - Arlin Eastman - 07-12-2025
(07-06-2025, 11:58 AM)jteneyck Wrote: Don't wait too long, Arlin. I'm getting older.
John
I have to put a table top on my 1956 Delta and then save some $$ or two months from now. Well that is after I help someone else with some funds who is mentally slow after the stroke. She is selling pillows cases which she makes from cross stitch and she needs the money and to feel good she sold two of them.
