+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Cutting board video (/showthread.php?tid=7164663)
Cutting board video - glzahn - 12-10-2015
I've searched for the cutting board video that I saw posted here a while back and can't find it. It's the one where the guy builds the board, bandsaws a curve through it, routes that and glues strips of complimenting wood in it, glues it up then repeats the cutting of curves and gluing strips in it.
Can anyone point me in the right direction.
Re: Cutting board video - dlgWoodWork - 12-10-2015
Is it this one?
https://www.youtube.com/watch?v=uK9CKmjmqso
Or this one?
https://www.youtube.com/watch?v=rerY3nLhgv4
Re: Cutting board video - BpB123 - 12-10-2015
OOPS ... just re-read the original post. The one referenced below is not the one you are looking for. Sorry
do a search w/in woodnet for a recent Drunken Cutting Board post (12/4)... there is a link to a video that sounds like what you described. If you cannot find the thread, PM me and I will send you the link (I do not know how to cross-reference the thread in this a post)
-Brian
Re: Cutting board video - FBranco - 12-10-2015
This one:
https://www.youtube.com/watch?v=lR9_CjQYZj4
Re: Cutting board video - fall - 12-10-2015
A lot of cool videos
Re: Cutting board video - K. L. McReynolds - 12-10-2015
One I did--video is about 6 posts down here
Re: Cutting board video - Steve N - 12-10-2015
I was thinking the earliest one was an MTMwood creation, but I couldn't find it there. I went searching my drives and it was made by Rick Koorman I think this is what you want. I like his videos, very instructive, and great tunes
https://www.youtube.com/watch?v=Fyxzi3ElNbU
Re: Cutting board video - Steve N - 12-10-2015
Mac, check your linkie. I'm getting "about blank"
Re: Cutting board video - glzahn - 12-10-2015
Yep, this is the one.
Thanks,