+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Looking for these hinges (/showthread.php?tid=7111576)
Looking for these hinges - Cub_Cadet_GT - 10-04-2015
I just bought a new (old) house and want to replace the hinges of the cabinets in the family room. They have several layers of paint and want satin nickel finish ones.
I took one off and I have never seen any like it before. They are semi-consealed but have these threaded inserts that go into the face frame and door and then screw into those inserts. They also have a 90 degree bend in them that fits into the rabbit cut into the door as they are partial inset doors.
Has anyone seen these before and know where I can get replacements?
Re: Looking for these hinges - fishhh4 - 10-04-2015
Inset ..overlay . Looks to be 3/8 *3/8
The mounting method is odd. With the single screw. OLD?????
DLH
Re: Looking for these hinges - Cub_Cadet_GT - 10-04-2015
fishhh4 said:
Inset ..overlay . Looks to be 3/8 *3/8
The mounting method is odd. With the single screw. OLD?????
DLH
Yea that is all I could find. But those don't use those inserts and the way they are mounted I cannot screw normal inset overlay hinges without removing the inserts which looks to not be easy.
My guess is they are original to the house which was built in 1978.
Re: Looking for these hinges - BpB123 - 10-04-2015
Can't help with a supplier
But my track house built in mid-80's used the same hinges
May help with dating them
Re: Looking for these hinges - JGrout - 10-04-2015
why not just strip and refinish the existing ones?
JMO
Re: Looking for these hinges - Leinie - 10-04-2015
https://www.knobs.co/hinge-double-demoun...wYxcaAvJm8P8HAQ
Amerock Double demountable 3/8 inset hinges
Re: Looking for these hinges - mike4244 - 10-04-2015
Hardware store or even the box stores may carry them. I have used similar bought at HD or Lowes. My hinges mounted with 2 screws on each leaf instead of 1 like yours.
Re: Looking for these hinges - Phil Thien - 10-04-2015
Leinie said:
https://www.knobs.co/hinge-double-demoun...wYxcaAvJm8P8HAQ
Amerock Double demountable 3/8 inset hinges
The one thing I'll note is that over the years, and sizes can change slightly. Don't toss anything until you get a couple of these and verify they are the right animal.
Re: Looking for these hinges - Leinie - 10-04-2015
Excellent idea to order 1 set and try them.
They also make a single demountable that mounts the same on the door side, but uses regular screws on the edge of the face frame. If you shop around you may fing more color options.
Re: Looking for these hinges - Cub_Cadet_GT - 10-05-2015
JGrout said:
why not just strip and refinish the existing ones?
JMO
Because time is important to me and I would like to save it if possible.
