![]() |
Handplane storage - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: Handplane storage (/showthread.php?tid=6222734) |
Re: Handplane storage - Martin S. - 12-21-2014 Bump again. Re: Handplane storage - Bill Lyman - 12-21-2014 My cheap and easy one shown above still works fine. If you have the time, there are a whole lot nicer ones shown in this thread. Re: Handplane storage - Belg - 06-12-2015 I have a very narrow space that I would like to put my plane till and am wondering do you like the fact that yours has no tilt? I was thinking of either using the method you show or the hang them by the knob? What is a good rule of thumb for the little dividers between each plane 1/2" square? http://i178.photobucket.com/albums/w255/FordPrefect_photo/Shop%20Projects/DSC05291.jpg Re: Handplane storage - Mr Eddie - 06-12-2015 You guys have some very nice cabinets and chests. I keep mine on a shelf with carpet. If I'm not going to be using them for awhile I put them in plane socks. Lonnie PS Greg you got it bad buddy! You may be too far down the slope to ever get back up. ![]() ![]() Re: Handplane storage - FordPrefect - 06-13-2015 Belg said: I am happy with no tilt for my bigger planes. The brackets I made engage the planes so that I can easily put them up with confidence. The spacing was arbitrary, at the time the picture was taken my cabinet had a lot of room, I have since fit the planes a bit closer together. I would think 3/8" is a good minimum empty space between the planes or you are more ambitious, a 1/4" wooden divider like some here have done, would also work great. Re: Handplane storage - MikeinKCMO - 06-15-2015 My solution is similar to what others have done. ![]() Re: Handplane storage - Big Dave - 06-16-2015 LIL Not the most recent picture, but here's mine... Dave Re: Handplane storage - Martin S. - 06-05-2016 Last bump from me. Re: Handplane storage - Jerry White - 06-05-2016 Thanks for bumping this up, Martin and all. I had lost this! Re: Handplane storage - cputnam - 06-05-2016 I just copied the entire thread up to this point. |