+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: The new Mikiespace - 40X64X16 Pole Barn (/showthread.php?tid=6805621)
Re: The new Mikiespace - 40X64X16 Pole Barn - BloomingtonMike - 09-16-2015
Thank you everyone for the positive comments!! Feels real good, after working all night on it, to read the comments.
Tonight I installed outlets for the compressor circuit, and a couple for a DC circuit (was not sure of the two spots where will be the best access.
Also ran four outlets up at about 13'. I found a Neon 2nd generation Yamaha Vmax sign on ebay that is going on one end of the shop or the other so I put up some outlets for it. I also installed the last four outlets and wired in a chamberlain WSCLEV remote toggle switch that I hope will control some outdoor lighting.
I still need to pick some outdoor lights yet. Not sure I like the two I got on CL.
I also ordered some L14-30 receptacles today and some more L6-30s for the north wall. L14-30 will be for the 3ph setup.
Re: The new Mikiespace - 40X64X16 Pole Barn - BloomingtonMike - 09-20-2015
Today's progress:
Ran 12/2 romex for outlets for under cabinet lighting that will be under the binder bins at about 10'
Ran 12/2 romex for outdoor outlets on porch and the east and west garage doors
ran some 10/3 for a couple 3phase outlets and a 10/3 for a potential 1ph spot for my cnc router where I want 220V and the neutral
Built a pallet movable two sided easel and the wife painted a pallets worth of plywood white (43 sheets) using an airless system I borrowed. Its now on my list of tools to own
I loaded and stacked the sheets while she sprayed them. I stacked them up after they dried back on a pallet.
Re: The new Mikiespace - 40X64X16 Pole Barn - BloomingtonMike - 09-21-2015
Shot 53 sheets this afternoon by myself with the airless. Blew two of them off with compressor, unloaded the two from a pallet and loaded them on my easel back to back, sprayed the two, then rested on edge for drying, and finally re-stacked them on the pallet after they were dry. At one point I had 35 sheets each resting on each other in a long house of cards base lol.
Re: The new Mikiespace - 40X64X16 Pole Barn - BloomingtonMike - 09-23-2015
49 more pieces sprayed last night so averaging just under 50 per 5 gallons.
I am also working on some porch lights but don't want huge holes in the siding. I found these referenced in a youtube video:
Arlington 8161 Vertical Siding Lamp Mounting Kit with Built-In Box for Flat Surfaces, White, 1-Pack.
http://www.amazon.com/gp/product/B000KKH...ailpage_o00_s00
I ordered a couple off amazon - going to try those to mount the kights too. If you have really large lights they have plates that go over them to make a larger panel to mount the light to.
Arlington 8100LP-1 MEGA Siding Plate for Large Fixtures
http://www.amazon.com/Arlington-8100LP-1-Siding-Plate-Fixtures/dp/B002W6ZPVE/ref=pd_bxgy_60_img_y
I like the idea of having a small hole for the romex but still being able to secure it with a nm clamp. Ill seal it up like a external weatherproof box for an outlet.
Re: The new Mikiespace - 40X64X16 Pole Barn - BloomingtonMike - 09-25-2015
Ended up with 209 sheets sprayed with white latex this week.
Did this drawing too on the Griz site.
Also got a little bling for some of the upper outlets.
Re: The new Mikiespace - 40X64X16 Pole Barn - Gregory of Sherwood Forest - 09-25-2015
Like the bling!
That Griz layout app is pretty darn handy. I've recommended it to loads of folks. What are the circles at the opposing corners?
Re: The new Mikiespace - 40X64X16 Pole Barn - EricU - 09-25-2015
that's really looking good
Re: The new Mikiespace - 40X64X16 Pole Barn - BloomingtonMike - 09-25-2015
In opposing corners are a 80 gallon and a 60 gallon compressor serving a 360 degree 3/4 maxline rapidair airline with nine drops each with a regulator. Each roll up door gets an airline reel and there will be a commercial one in the center too.
Re: The new Mikiespace - 40X64X16 Pole Barn - BloomingtonMike - 10-05-2015
This weekends accomplishment:
New porch lights installed
Radiant floor heat wall insulated and built out:
Radiant floor heat components soldered and laid out:
Pumps and valves installed on wall:
Re: The new Mikiespace - 40X64X16 Pole Barn - Big Dave - 10-05-2015
BloomingtonMike said:
Radiant floor heat wall insulated and built out:
I guess it's getting to be that time of year...
