+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Your dream router and table (/showthread.php?tid=7378829)
Pages:
1
2
RE: Your dream router and table - Arlin Eastman - 07-19-2025
(07-18-2025, 08:56 AM)ajkoontz Wrote: This is my dream set-up. It's a work in progress, started in 2020 but not yet complete because life gets in the way. It's 2 SawStop cast iron wings bolted together and mounted on a Kreg table. Fence is shop-built using 80/20 components + off the shelf router parts from various WW suppliers. JessEm lifts on both sides. Plan is to build lower cabinet for bit and misc. storage and possibly add on-board shop vac for dust collection (still working out the DC situation). I really need to make time to get this done and I think this will be the ultimate router table set-up.
Looking good so far and would love to see some working pictures as you go
RE: Your dream router and table - Woodshop - 07-27-2025
That set up looks like my Bench dogs I set up for making doors I simply change the plates out with the routers attached to change profiles . I have 4 profiles using 8 routers. It is my dream cabinet door setup and I have a shaper for raising panels.
[attachment=55355]
[attachment=55356]
RE: Your dream router and table - Arlin Eastman - 07-27-2025
That looks sweet and will have to come back and look at this thread when I am done with the other projects.
RE: Your dream router and table - JDuke - 08-02-2025
(07-27-2025, 03:16 PM)Woodshop Wrote: That set up looks like my Bench dogs I set up for making doors I simply change the plates out with the routers attached to change profiles . I have 4 profiles using 8 routers. It is my dream cabinet door setup and I have a shaper for raising panels.
I have a set of two bench dogs set up back to back and have been thinking of taking them apart, as they are a bear to move around together, and would be easier to move individually.
RE: Your dream router and table - Arlin Eastman - 08-04-2025
(08-02-2025, 05:54 PM)JDuke Wrote: I have a set of two bench dogs set up back to back and have been thinking of taking them apart, as they are a bear to move around together, and would be easier to move individually.
I am not picturing what you are talking about with just bench dogs.
RE: Your dream router and table - Woodshop - 08-06-2025
(08-02-2025, 05:54 PM)JDuke Wrote: I have a set of two bench dogs set up back to back and have been thinking of taking them apart, as they are a bear to move around together, and would be easier to move individually.
My setup is on locking casters and easily moved.
RE: Your dream router and table - JDuke - 08-06-2025
(07-27-2025, 03:16 PM)Woodshop Wrote: That set up looks like my Bench dogs I set up for making doors I simply change the plates out with the routers attached to change profiles . I have 4 profiles using 8 routers. It is my dream cabinet door setup and I have a shaper for raising panels.
Arlin, what I mentioned looks almost identical to the pictures that woodshop had pictured other than I don’t have a power feeder mounted in the middle.
I could probably get away with better casters, and maybe changing where the opening is on the table.
RE: Your dream router and table - Arlin Eastman - 08-08-2025
(08-06-2025, 02:15 PM)JDuke Wrote: Arlin, what I mentioned looks almost identical to the pictures that woodshop had pictured other than I don’t have a power feeder mounted in the middle.
I could probably get away with better casters, and maybe changing where the opening is on the table.
Ahhhh ok